Halloween Cookie Cutters

It’s Halloween soon so we thought we should look for some nice Halloween 3D printable files. In end end we decided that we would put together a selection of biscuit cutters, or cookie cutters. We have collected them from 3 designers on Thingiverse (we will try our best to not make the attribution too confusing).

In any event you can have a lot of fun with these and make some seasonal biscuits for all those trick or treaters that are going to come calling at the end of October. We know that there are a lot of other Halloween 3D prints out there, numerous pumpkins, so you can festoon your house with Halloween related models.

All files are .STL format.

No most of them don’t have much information except those in the OogiMe Folder and for these we have:

Halloween Witch Model – Estimated Print Time ~ 44 min; Scale XYZ (85.89, 87.63, 15) mm; Filament ~ 15 g; Standard Resolution (Layer height 0.4 mm, 10% infill); Speed: Extruding 90 mm/s, Travelling 150 mm/s

Halloween Cat Model – Estimated Print Time ~ 31 min; Scale XYZ (64.51, 86.5, 15) mm; Filament ~ 11 g; Standard Resolution (Layer height 0.4 mm, 10% infill); Speed: Extruding 90 mm/s, Travelling 150 mm/s

Halloween Bat Model – Estimated Print Time ~ 23 min; Scale XYZ ( 85.6, 41.83, 15) mm; Filament ~ 8 g; Standard Resolution (Layer height 0.4 mm, 10% infill); Speed: Extruding 90 mm/s, Travelling 150 mm/s

Halloween Spider Model – Estimated Print Time ~ 49 min; Scale XYZ (87.57, 73.73, 15) mm; Filament ~ 17 g; Standard Resolution (Layer height 0.4 mm, 10% infill); Speed: Extruding 90 mm/s, Travelling 150 mm/s

Halloween Candy Model – Estimated Print Time ~ 33 min; Scale XYZ (85.62, 48.5, 15) mm; Filament ~ 11 g; Standard Resolution (Layer height 0.35 mm, 10% infill); Speed: Extruding 90 mm/s, Travelling 150 mm/s

Halloween Witch Hat Model – Estimated Print Time ~ 23 min; Scale XYZ (92.15, 80.6, 15) mm; Filament ~ 10 g; Standard Resolution (Layer height 0.4 mm, 10% infill); Speed: Extruding 90 mm/s, Travelling 150 mm/s

Halloween Grim Reaper Model – Estimated Print Time ~ 36 min; Scale XYZ (85.58, 71.22, 15) mm; Filament ~ 14 g; Standard Resolution (Layer height 0.4 mm, 10% infill); Speed: Extruding 90 mm/s, Travelling 150 mm/s

As always please let us know how you get on and please send us some pictures, and or comments. Also we cannot guarantee they are going to work with your software, on your printer, with your 3D printer filament. but if you can help others please pass on your experience.

So we would like to thank:

  3D printer cookie cutters by Faberdaser (faberdasher) / Creative Commons – Attribution – Non-Commercial – Share Alike license

  3D printer cookie cutters by nischi (nischi) / Creative Commons – Attribution – Non-Commercial license

  3D printer cookie cutters by OogiMe (OogiMe) / Creative Commons – Attribution – Non-Commercial license