JavaScript is off. Please enable for the site to work properly.
  • search for 3D printers and 3D printer filament

Your one stop UK shop for 3D printers and 3D printer filament

Firm Clear UV resin

From: £66.00 (£55.00 + £11.00 VAT)

Firm Clear UV photopolymer for SLA or DLP printers. Produces Hard models with slight flexibility. Available for UV laser (405nm) and UV DLP (380-405nm)

Please select Options

Clear
SKU: BR3DCL01-UV-FIRM Categories: ,
iDig3Dprinting free delivery
iDig3Dprinting technical support
iDig3Dprinting ways to pay

Photocentric Firm Clear UV resin are designed for printing hard objects were yo need a little bit of flexibility. Depending upon the thickness of the object designs printed with Photocentric Firm resin will have medium to high tensile shear properties with limited elongation. Objects can be bent slightly with extreme force and thin objects will compress and deflect enough to bend and return.

By using their firm resin you will benefit from fast exposure times with a wide exposure latitude so that you will achieve good results over a wider range of exposure conditions. The other great benefit is the price! Photocentric hard resin is considerably cheaper than comparable UV SLA or DLP resins. So get great results at a great price.

About Photocentric UV resins

Photcentric’s UV resins are designed to work with a wide range of laser printers accommodate both open and closed mode resin profiles. Their UV laser resins are formulated to work at 405nm and so can be used with popular laser printers like the Form 1+, Form 2 & Moai . For lower powered printers their DLP range of resins should be used as these can operate from 380nm-405nm. Photocentric UV resins come in a wide variety of material properties: Hard, Firm, High Tensile, Flexible and Castable formulations.
The solid material is tough, durable and long lasting provided it is stored in dry conditions away from strong UV light.

Processing instructions

Follow the procedures laid out in your 3D resin printer ́s user manual. Polymer should be poured into the tray away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep hood on at all times. Liquid polymer is soluble in water and soap. After cleaning, objects surface tack can be removed by leaving under water in UV for 20 minutes or longer. If any surface tack persists you can remove it by wiping the parts with IPA.

Firm resin data sheets

Photocentric Firm SLA UV laser resin TDS

UV Laser TDS

MSDS

UV laser MSDS

Photocentric hard SLA UV DLP resin TDS

UV DLP TDS

MSDS

UV DLP MSDS

Firm UV Resin specifications

    • Material: UV Laser SLA Resin or UV DLP resin
    • Volume: 1kg bottles
    • Compatible Printers: Form 1+, Form 2, Moai etc…
    • Wavelength: 405nm (SLA); 380nm-405nm (DLP)
    • Viscocity: 560 cPs
    • Hardness (after post exposure): 65Dshore
    • Tensile Strength (ASTM D638 after post exposure): 26 MPa
    • Tensile Strength (ASTM D638 before post exposure): 10 MPa
    • Tensile Modulus (ASTM D638 after post exposure):  700 MPa
    • Elongation at break (ASTM D638): 10%
    • Heat deflection temp (ASTM D648): 52°C
    • Density: 1.18 g/cm3
    • Storage temperature: 10-50°C

*Note that colours are representative

** Photocentric colour availability can vary a lot so please check – Tel: 01453 808026

Weight 1.3 kg
Dimensions 27 × 18 × 13 cm
Tones

Filament type

Brands

Photocentric

Resin Type

UV DLP, UV Laser

Reviews

There are no reviews yet.

Be the first to review “Firm Clear UV resin”

You may also like…

  • Firm Cream Daylight SLA resin

    £66.00
  • Hard Grey UV resin

    £66.00
  • Flexible Amber Daylight SLA resin

    £66.00
  • Hard Cream Daylight SLA resin

    £66.00