JavaScript is off. Please enable for the site to work properly.
The BCN3D sigma dual extruder 3d printer - Get great results, Print complex shapes - Winner of 3D hubs Workhorse 2017 Award!
Makerbot dissolvable filament is a 1.75mm HIPS filament for use as a dissolvable solid infill support material for complex 3D prints

Makerbot Dissolvable filament

£78.54 (£65.45 + £13.09 VAT)

SKU: MP05417 Categories: ,
iDig3Dprinting free delivery
iDig3Dprinting technical support
iDig3Dprinting ways to pay

Makerbot Dissolvable filament is a high quality HIPS 3D printer filament optimized for use with the Makerbot Replicator 2x and Makerbot ABS filament

Makerbot Dissolvable filament is a premium quality HIPS, compatible with the Makerbot Replicator 2x and other 3D printers that use 1.75mm diameter filament. Makerbot Dissolvable  filament comes in spool sizes of 1kg. The is a great support material for the 3D printing of complex shapes when used in conjunction with Makerbot ABS Filament. To be used as a support you need a dual extruder 3d printer, one head for the primary material, the other for the HIPS dissolvable support material.

Why Makerbot Dissolvable filament?

MakerBot Dissolvable Filament is designed for use as a solid infill material with MakerBot ABS Filament. HIPS easily dissolves in a limonene bath in just 8-24 hours, the time it takes is dependent on the size and complexity of the print.

Makerbot Dissolvable filament is made from high quality HIPS, extruded with high diameter consistency to give you consistent and reliable 3D printing. High quality filament reduces the rate of 3d printing failure and saves you both money and time. Makerbot filament is produced using state of the art filament manufacturing and quality control standards and is trusted by leading institutions and companies throughout the world.

Each Makerbot filament colour is comprehensively quality tested at 100-micron and 200- micron layer resolutions on MakerBot Replicator 3D Printers to verify it will perform every feature that MakerBot® MakerWareTM software offers.

MakerBot Dissolvable Filament requires a heated build platform. MakerBot HIPS Filament adheres well to kapton tape on heated build plate. HIPS is more prone to warping than PLA so a Heated bed and/or heated print chamber are required. Good first layer adhesion is essential so ensure that you have a level, grease free, build platform and an appropriate z-height.

Makerbot Dissolvable filament specifications

  • Glass Temp: 100° C

  • Melting Temp: 160° C

  • Nozzle Temp: 250° C

  • Bed Temperature: 100°C+

  • Compatibility: Replicator 2x

Note: Store MakerBot Dissolvable Filament in a cool, dry place as it can absorb moisture from air and long-term exposure to humidity can compromise filament quality and performance.



Additional Information



Filament Diameter


Filament type

HIPS, Soluble

Reel Size





There are no reviews yet.

Be the first to review “Makerbot Dissolvable filament”