Want to 3D print wooden objects then take a look at ColorFabb WoodFill 3D printer filament. Its made with 70% ColorFabb PLA and 30% recycled wood fibre. This is the “Fine” grain version in 1.75mm or 2.85mm diameter.
ColorFabb PLA is specially formulated to be less brittle than other PLAs (although see our Biome 3D PLA) by the addition of a small quantity of PHA. Each spool comes with a label on the packing that indicates the recommended printing temperature. For stronger prints and better reliability ColorFabb say that you can increase flow rate by 0-10%. This will cause the filament to keep going through the hot zone at a steady pace.
We also sell WoodFill in sample packs of 4m, 8m, 12m etc.. so you can try out the speciality filament or buy some ColorFabb WoodFill for that one-off project.
Its time to get experimenting to see what you can make out of wood!
ColorFabb WoodFill Use Guidance
- Recommended extruder temperature: 195 – 220°C
- Recommended printer bed temperature: 50-60°C
- Recommended print speed: 40-100mm/s
- Tolerance: +/- 0.05mm