NinjaFlex is also a high elasticity filament with great abrasion resistance that can be used for making objects that won’t break under pressure and do not require the rigidity of other more common filaments like ABS or PLA. This Filament is ~85A on the Shore Hardness Scale. NinjaFlex is designed for direct-drive extruders. It adheres well to the build platform and the bonding between layers is very good. FDM printers that accept ABS and PLA should work fine with NinjaFlex.
Ninjaflex can be used for seals, gaskets, plugs, levelling feet and protective applications e.g. that ubiquitous 3D printed mobile phone case.
Recommended Ninjaflex printer settings
- Recommended extruder temperature: 225 – 235°C
- Recommended platform temperature: 20 – 40°C ( Glue and/or masking tape can be used if you don’t have a heated bed)
- Recommended Print Speed: Top & bottom layers – 10-20mm/s; Infill – 30 mm/s
- Fan settings: Use cooling fan from layer 2 and up