Replacement Cetus Nozzle Barrel for the extruder Heater Kit V2. This is the latest version (V5) of the Cetus Nozzle where the PTFE lining is fitted within the heat break.
The advantage of the nozzle barrel is that you can buy a selection of different nozzles separately and simply replace the nozzles rather than the whole nozzle assembly if you need to change nozzle diameter or material.
The nozzles are compatible with Extruder Heater Kit V2.
Use the 0.6mm nozzle for printing with a layer thickness of 0.3mm and above. The 0.2mm nozzle is for printing with a layer thickness of 0.05mm & 0.07mm. The Cetus is optimised to print these layer thicknesses with the respective diameter nozzle.
Steps to replace your nozzle
- Use the nozzle wrench to then unscrew your old nozzle from your Cetus and remove.
- Screw in your new nozzle